Opel Automobile Owner's Manual page 27

Switching heater off
Press the heating button again to
switch heating off: the light in the
button and the heating symbol Y
extinguishes.
Programming departure times
Press the program button.
Preset memory location 1, 2 or 3
flashes.
Select desired program memory
location by repeatedly pressing the
program button, and set departure
time using the back or next button.
Weekday flashes.
Set the weekday using the back or
next button. When flashing ceases,
the time and weekday are set.
Repeat procedure to programme the
other preset memory locations.
Programming heating duration
With heater unit switched off, press
and hold the back button for approx.
3 seconds.
Heating duration flashes.
Change heating duration for
programmed mode using the back or
next button. The value can be set
from 10 to 120 minutes.
Activating departure times
Departure times must be activated
individually. Only one departure time
can be activated at a time.
Press the program button until the
desired memory location flashes.
When flashing ceases, the memory
location to be activated appears in
the display.
Deleting departure times
Press the program button.
Preset memory location 1, 2 or 3
flashes.
Select desired program memory
location by pressing the program
button and erase departure time by
repeatedly pressing the program
button until the time is displayed
instead of the memory location.
Auxiliary heating systems
Resetting
If the power supply is interrupted or
the battery voltage is too low, the
current weekday and time and all
programmed departure times are
lost: The unit will need to be reset.
To reset weekday and time: Press
and hold the clock button for approx.
2 seconds.
Time of day flashes.
Set the time using the back or next
button.
Weekday flashes.
Set the weekday using the back or
next button.
When flashing ceases, the time and
weekday are set.
4-5
Back to overview