Connections And Installation; Attaching The Stand (Adjusting The Angle Of The Unit) - Panasonic KX-UT670 Operating Instructions Manual

Connections and Installation

Notice
Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of
improper installation or operation inconsistent with this documentation.

Attaching the Stand (Adjusting the Angle of the Unit)

The stand can be attached to the unit in two ways in order to change the angle of the unit.
Depending on the angle you want to use the unit at, the holes to which you attach the stand differ, so determine
your preferred angle before attaching the stand.
If you want to change the angle after you have attached the stand, remove the stand (Page 96), and then
reattach it at the desired angle.
Attaching the Stand
1.
Insert the 4 tabs into the holes on the back of the unit body (either A or B).
n For "A"
Document Version 2011-09
n For "B"
30°
Connections and Installation
A
B
65°
Operating Instructions 95