About Phone - Panasonic KX-UT670 Operating Instructions Manual

Configuration
Accessibility
Setting
Key command on USB
keyboard
Date & time
Setting
NTP Server
Set date
*1
Select time zone
Set time
*1
Use 24-hour format
Select date format
*1 When an NTP server has not been specified, when unit is turned off, time and date settings are lost. Each time the unit is restarted,
the time and date settings must be made again.
The date format associated with this setting depends on the value selected in [Select language locale] (Page 113).
*2

About phone

Setting
Status
Legal
information
116 Operating Instructions
Sets whether telephone functions
can be performed by using a USB
keyboard.
Specifies whether to use an NTP
Use NTP server. If enabled, enter information
server for [NTP server address] and
[Synchronization Interval].
—NTP server
Sets the NTP server to use.
address
—
Sets the interval for synchronization
Synchronizat
with the NTP server.
ion Interval
Enter the date here when an NTP
server is not used.
Selects the time zone.
Enter the time here when an NTP
server is not used.
Specifies whether the time is
displayed in a 24-hour format (when
off, the time is displayed in a 12-hour
format).
Selects the format for the display of
the date.
Network Displays the status of the network.
Phone Displays the status of the phone
service service for each configured line.
Open source Displays open source license
licenses information.
Description
Description
Description
Value Range Default
On/Off
Value Range Default
On/Off
xxx.xxx.xxx.xxx
10–86400 s 43200
—
Select from 84
GMT +00:00
regions
—
On/Off
Normal
*2
mm/dd/yyyy
Normal
dd/mm/yyyy
yyyy/mm/dd
Value Range Default
—
—
—
Document Version 2011-09
Off
On
—
—
—
On
—
—
—