Electrical Connection And Foot Control - Pfaff synchrotronic 1229 Instruction Book

ectrical connection and foot control
Il the cord out of the foot control and
sh plug M into the machine socket.
ace the foot control under the table, as
own.
ush power cord plug K into the machine
)cket and plug L into the wall socket.
ress master switch 14 (page 4). Press
wn foot control N. The machine starts
wing. The more you press down the
dal, the faster the machine runs. If the
achine does not start, release the foot
ntrol, then press it down again.
To replace the cord in the foot control,
pull it slightly, then release it, and it will
rewind into the control automatically.
t.