KitchenAid Sculptura KUDR24SE Use & Care Manual page 17

Canceling a cycle
You can cancel a cycle anytime during
the cycle.
1, Press the Cancel pad once, then wait.
The Cancel light will glow. There
is a 5-second pause between
the time Cancel is pressed and
draining begins.
2. Let the dishwasher drain completely.
Option selections
Press a pad to select an option. If you
change your mind, press the pad again to
turn the option off. To select a different
option, press another pad.
High Temp. Wash
Select this option, and water will heat during
the main wash for better cleaning
of heavily soiled dishes. Water
heating is automatic in the wash
portions and final rinse of the
Pots & Pans cycle, and in the final rinse of
the Normal and Light China cycles.
Energy Saver Dry
Use this option to air dry dishes without heat.
For best results, keep the rinse
agent dispenser filled. Under certain
conditions (hard water, empty rinse
agent dispenser, plastic items in the
load, etc.) you might find some water left on
plastics, dishes, and silverware,
Delay Hours
The Delay Hours light glows when the dish-
_ asher has been set for a delayed
start. The delay light will turn off
when the cycle starts. See page 19
on "Setting a delay start".
Control panel lights
The Cycle Monitor allows you to see what
portion of a cycle your dishwasher is in. The
Clean light glows when a cycle has finished.
All other lights will turn off. The Clean light
will turn off when you open the door.
CYCLE MONITOR
WASH RINSE DRY CLEAN
[ II I _1 II 11 II ] ; ]
Water Heating
The Water Heating light glows while water
in the dishwasher
i WATER HEATING r is heating. Wash
or
rinse action contin-
ues while the
water heats.