Advertisement
Available languages
Available languages
Grill Head to Cart
This step requires two people to lift and position grill head onto cart.
Remove the tie wraps securing regulator hose to underside of grill head. Pull hose and igniter
wire out to side of grill head.
[]
Carefully lower the grill head onto the cart. Make sure the regulator hose and igniter wire are
hanging outside the cart. Open lid and attach head to cart with (4) M6x]3 screws and M6
compression washers.
M6X]3 screw
Qty: 4 pcs
M6 compression washer
Qty: 4 pcs
,
i
/
/
/
/ /
20 • 16153-
50300312
Advertisement
