Omega Fitness - Omega CO-BD7 series Instruction Book

USING THE EXERCISE CONSOLE
SELECTIING MODES
PULSE RATE (I')
-Press "MODE" button until "qp "appears. Before measuring your pulse rate, place
both your hands on the contact sensors and the monitor will show the heart beat rate in
beats per minute (aMP) of current on the LCD after 3-4 seconds.
NOTE: During the process of pulse measurement, because of the contact jamming, the measurement
value may be higher than the virtual pulse rate during the first 2-3 seconds, then will return to normal level.
To ensure testing veracity, it is suggested to test pulse during stop/pause exercise to avoid the influence
caused by hand actions. The measurement value can not be regarded as the basis of medical treatment.
ALARM
-The console will "BEEP" when press "MODE", "SET" and "RESET" buttons.
AUTO ON/OFF
-Without any exercise signal for 8 minutes, the power will turn off automatically.
exercise start or press any button, the console will start automatically.
As long as
SPECIFICATIONS
FUNCTION PRESET
•Each function target preset range is as below :
AUTO CAN: Every 4 seconds on each function
TIME:
SPEED:
DISTANCE:
CALORIE:
PULSE:
Preset area is from 00:00 to99:00, each increment is 1:00 (minute).
The maximum pickup signal is 99.9KM (or 1500RPM)
Preset area is from 0.00 to 9999MI, each increment is 0.10 km or mile.
Preset area is from 0 to 990, each increment is 10 cal.
Preset area is form40 to240, each increment is 1 BPM.
BATTERY TYPE:
OPERATING TEMPERATURE:
STORANGE TEMPERATURE:
2 pcs of sizeAA or UM3
0oc ~ +40oc (32°F- 104°F)
_10oc- +60oc (14°F ~ 140°F)
OMEGA FITNESS 13