Monitor And Pedals - Omega CO-BD7 series Instruction Book

ASSEMBLING
STEP 5 OF 5
MONITOR AND PEDALS
FIG 5
The screws may be prefitted to the supports.
9. Connect the console cable (19) to the console (20). Position the console (20) carefully onto the
Bracket on the top of the handlebar post (12),secure with 2 screws (20A) provided. Connect the hand
pulse cable (10A) to the console (20).
10. Fit the pedal (22L) marked L to the left side of the bike, and the pedal (22R) marked R to the right side of
the bike, viewed from the rider's seated position (fig 6). Tighten the pedals (22R/L) with the multi tool
(29) provided. Please note that the right pedal (22R) needs to be screwed in clockwise direction. The
left pedal (22L) needs to be screwed in anti-clockwise direction.
NOTE: The right pedal (22R) needs to be screwed in clockwise direction.
The left pedal (22L) needs to be screwed in anti-clockwise direction.
10 OMEGA FITNESS