Hour/Minute Arrow Pad; Display; Indicator Lights; Black Out The Display - Kenmore 911.63271 Owner's Manual

OPERATION
OvenControl, Clock & Timer
OFF
Your new range CLOCK, TIMER and OVEN operations are simple and easy
to understand,
The HOUR/MIN arrow pads allow
you to set the exact time you need
The display in the center of your
control will show:
1. The time of day CLOCK
2. The amount of time you choose
when using the TIMER
If the display flashes an "F" followed
by a number and beeps continuously,
you have a function error code, Note
the number after the "F" Turn the
oven control knob to the OFF
position Allow the oven to cool for
about 1 hour and retry the oven
operation If the problem repeats call
for service Advise the technician
what code was flashing
Your control has individual indicator
lights that will show you the
operations you have chosen
As you read through your manual, you
will find what each of these indicators
is used for and how they will help you
in understanding your new control
Your new control has the special
feature of blacking out the display
(have nothing showing in the display)
To activate this feature:
If the time of day is showing in the
display, press the CLOCK pad once
To bring back the display from the
time of day black-out, press the
CLOCK pad twice
When the power to your range is
turned on for the first time, the display
will flash the time when the power was
turned off You can set the clock at
this point, or press the clock pad to
stop the flashing
As a safety feature, this oven will
automatically shut off if it has been
left on for more than 12 hours
This feature can be disabled
See page 14
9