Brew Strength Control; Cleaning The Coffee Maker - Kenmore brewNwave 721.63992 Use And Care Manual

BREW STRENGTH CONTROL
Pre-selecting the taste (flavor selector)
The flavor selector (Fig. 9) allows you to adjust the flavor of your coffee to suit your
personal tastes. It helps ensure a full, rich flavor, while allowing you to select a milder
flavor without bitter aftertaste, or a strong, robust taste.
If you prefer a milder coffee, without bitter aftertaste, pull the flavor selector toward the
center of the filter basket (Fig. 10).
If you prefer a strong, robust flavor, push the flavor selector in to the side of the filter
basket (Fig. 11).
<Fig. 9> <Fig. 10> <Fig. 11>
CLEANING THE COFFEE MAKER
To clean the coffee maker after brewing, be sure the unit is OFF and has cooled.
Discard the paper filter and grounds, and clean as follows:
The water reservoir, filter basket, carafe, and carafe lid are all top-rack dishwasher
safe. They may also be hand-washed.
Warming plate may be cleaned with a soft damp cloth.
Do not use abrasive cleansers or scouring pads. Never immerse the Coffee Maker.
If you want to remove carafe lid, open and tilt the lid to one side.
If you want to separate filter basket from water reservoir, refer to Fig.12, 13.
Reassemble the filter basket and reservoir with opposite motion being careful to
properly engage the reservoir's seal. Ensure the filter basket is fully seated to the
reservoir to prevent leakage.
<Fig. 12> <Fig. 13>
22