Table of Contents
Advertisement
SELF-CLEAN
TIME
LENGTH
For satisfactory results, use a 2 hour Self-Clean cycle for
light soils and a 3 hour cycle for average or a 4 hour
cycle for heavy soils,
The kitchen area should be well ventilated using an
open window, ventilation fan or exhaust hood during
the Self-Clean cycle. This will help eliminate the normal
odor s associated with the Self-Clean cycle.
To Set the Controls for a Self=Clean Cycle or a
Delayed Start Self=Clean Cycle=
If you do not want to start a Delayed
Self-Clean Cycle,
skips s teps 2 3. .....................
1.
Be sure the clock shows the correct time of day.
2.
Press START TIME. The" =" in the time of day will
flash.
3.
Press and hold the A
pad to scroll to the time to
start the delayed Self-Clean cycle. Release the pad
when the desired time is displayed.
4.
Press CLEAN. "
"appears
in the display.
5.
Press the A
or V
once. "3:00" appears in the
display for a 3 hour cycle. To change to a 2 hour
cycle press V.
"2:00" appears in the display or to
select a 4 hour cycle press A.
"4:00" appears in the
display.
As soon as the controls are set, the motor driven
lock will begin to close automatically and the "DOOR
LOCK" indicator light will flash. DO NOT open the
oven door while the light is flashing (it takes about
15 seconds for the oven door to lock).
6.
"CLn" will appear in the display during the Self-Clean
cycle and the "DOOR LOCK" light will glow until the
Self-Cleaning cycle is complete or cancelled and the
oven temperature
has cooled.
When the Self-Clean
Cycle is Completed=
1.
The time of day or "End" will appear in the display
window and the "Clean" and "DOOR LOCK" light will
continue to glow.
2.
Once the oven has cooled down for about 1 HOUR
and the "DOOR LOCK" light has gone out, the oven
door can be opened.
3.
If "End" is in the display and the Select Clean
indicator light remains ON, press CLEAR. The time of
day will appear in the display.
When the oven is cool, wipe away any residue or
powdered ash with a damp cloth or paper towel.
Stopping or Interrupting
a Self=Cleaning
Cycle=
If it becomes necessary to stop or interrupt a Self-
Cleaning cycle:
1.
Press CLEAR,
2.
Once the oven has cooled down for about 1 HOUR
and the "DOOR LOCK" light has gone out, the oven
door can be opened.
3.
Restart the Self-Clean cycle once all conditions have
been corrected.
To avoid possible burns use care when opening the
oven door after the Self-Cleaning cycle. Stand to the
side of the oven when opening the door to allow hot air
or steam to escape.
DO NOT force the oven door open. This can damage
; the automatic door locking system. Use caution when
opening the door after the Self-Cleaning cycle is
completed. The oven may still be VERY HOT.
Advertisement
Table of Contents
