Placement Ofburner Grates; Surface Cooking Utensils - Electrolux E36GC70FSS1 Use & Care Manual

Surface Cooking
PLACEMENT OF BURNER GRATES
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Place the grates on the Cooktop. Be sure they are right located
inside the stainless steel surface.
ATTENTION: Do not slide the grates on the cooktop, doing so
can damage the surface.
SURFACECOOKINGUTENSMLS
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
*GOOD POOR
, Curved and warped pan bottoms.
Pans should have flat bottoms.
Check for flatness by rotating a
ruler across the bottom. There
should be no gaps between the
pan and ruler.
* Specialty pans such as lob-
ster pots, griddles and pres-
sure cookers may be used but
must conform to the above rec-
ommended cookware require-
ments.
• Flat bottom and straight sides.
• Tight fitting lids.
Weight of handle does not tilt pan.
Pan is well balanced.
Pan sizes match the amount of
food to be prepared and the size of
burner.
Made of material that conducts
heat well.
Easy to clean.
Pan overhangs unit by more than
2.5 cm (1").
Heavy handle tilts pan.
Flame extends beyond unit.
Note: Always use a utensil for itsintended purpose. Follow manufactureCsinstruclions.
Some utensils were not made to be used in the oven or on the cooktop.