Porcelainenamelcooktop Cleaninginstructions - Electrolux EI30GS55JSC Use & Care Manual

General Care & Cleanin
CLEANING COOKTOP, BURNER G TES, BURNER
CAPSAND BURNER HEADS
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] I [] [] [] [] []
Burner Caps
Should you ever need to remove the burner caps for cleaning lift the burner cap off the
burner head. Clean heavy soils with an absorbent cloth. Rinse with a clean, damp cloth
and immediately thoroughly dry including the bottom and inside of the cap. Do not use
harsh abrasive cleaners. They can scratch the porcelain on the cap. Do not clean burner
caps in dishwasher.
When placing the burner caps, see important note below.
Whenplacingtheburnercaps on the cooktop,be surethe burnercaps are seatedfirmly on top of burner
heads,tmproperflame size and unevenheatingmayresultwhen any surfaceburnersare turnedONand
the burnercaps are notseatedcorreclly.
Burner heads
Lift the burner cap from the burner head. The surface burner heads are secured to the
cooktop and must be cleaned in place.
For proper gas flow it may be necessary to clean the burner heads and slots. To clean, first
use a clean DAMP cloth to soak up any spills. Remove any food from between the burner
slots using a small nonabrasive brush like a toothbrush and afterwards wipe using a damp
cloth. For stubborn soils located in the slots, use a small-gauge wire or needle to clean.
Should you experience ignition problems it may be that an ignition port hole is partially
blocked with soil (see figs 1 & 2). With the burner head in place, use a small wire gauge
needle or the end of a paper clip to clear the ignition port or ports.
Slots
Igniti )n
Figure 1 - Cooktop burner head