Kenmore 19502 Owner's Manual page 8

Set Up the Machine
= Plug in the Machine and Switch on the Power
Machine
cket
Power
supply
Power
NOTE:
Power supply plug
J
Before inserting the plug into your
machine, be sure the power switch is
OFF.
Check your outlet to be sure it is a 110 to 120
Volt AC outlet.
2. Insert the machine plug into the five-prong
outlet, as shown. It will only fit one way.
3. Insert the power supply plug into the outlet.
4. Push the light and power switch to turn on the
power and sewing light.
Sewing light
Power
NOTE: The Pattern Indicator light will
show [] .
SAFETY FEATURE:
Your machine wilt not operate unless the
light/power switch is turned on. If you are
interrupted or stop sewing, turn off the
light/power switch to prevent injury to
children.
5ensDr-_e= 70
5#
olZ) CCICE)
EEDD
i i j