Kenmore 19502 Owner's Manual page 21

Prepare the Bobbin (Continued)
_ensQrSe_u _Q
Bobbin
winder
stopper
NOTE: The Pattern Indicator will read "SP" to show the machine is
winding the bobbin.
7. Press the foot control gently to start the machine.
NOTE: After the bobbin is slightly filled, stop and clip the thread coming
from the top of the bobbin.
8. Slowly start the machine again and wind the thread until the bobbin
stops.
9. Push the bobbin winder spindle to the left and clip the thread.
10. Remove the bobbin.
11. Push in the clutch to put power back into the needle.
NOTE: If you do not push in the clutch, the machine will not run when
you press the foot control.
20