Use The Seam Guides; Turn A Square Corner - Kenmore 19502 Owner's Manual

The Stitching s kills covered i nthissection r equire
somespecial s kill from you. For all other
stitches, yourmachine d oes mostof the work.
Even if youareskilled atthese stitches, youwill
wantto learn the features o f thismachine t hat
may benew toyou.
Use the Seam Guides
Needle plate
Cornering guide
)
The seam guides on the needle plate are there to
help you measure seam width. The linesare 1/8"
apart, with the 5/8" and 7/8" lines marked.
Turn a Square Corner
.Cornering
uide
To turn a square corner 5/8" from the fabric edge:
1. Stop stitching and lower the needle by pressing the Up/Down Needle
Position button when the fabric edge facing you lines up with the
cornering guide, as shown.
2. Raise the presser foot and turn the fabric to line the edge with the 5/8"
seam guide.
3. Lower the presser foot and begin stitching in the new direction.
35