Zero Feeding - Kenmore 385.11602090 Service Manual

SEWING MACHINE
SOURCE 385
PAGE 16
DIV. 20
MODEL 385. 11602090
385. 12708090
385. 12710090
385. 12712090
385. 12714090
MACHINE SETTING: I. STITCH SELECTOR :
STITCH LENGTH :
ZERO FEEDING
4
CHECK:
I. PUT A PIECE OF PAPER ON THE NEEDLE PLATE.
2. IF THE PAPER MOVES WHEN YOU TURN THE HANDWHEEEL TOWARD YOU, MAKE
ADJUSTMENT AS FOLLOWS.
ADJUSTMENT: I. REMOVE THE ARM COVER, THE BELT COVER AND THE CONTROL PANEL UNIT.
2. PUT A PIECE OF PAPER ON THE NEEDLE PLATE.
3. TURN THE ADJUSTING SCREW (C) IN THE DIRECTION OF (A) WHEN THE PAPER
MOVES FORWARD.
TURN THE ADJUSTING SCREW (C) IN THE DIRECTION OF (B) WHEN THE PAPER
MOVES BACKWARD.
4. ATTACH THE CONTROL PANEL UNIT, THE BELT COVER AND THE ARM COVER.
S
STITCH LENGTH
DIAL
C ,