And Brush Cleaning - Sears Kenmore 11637213793 Owner's Manual

CHANGING,BRUSH CHANGING
AND BRUSH CLEANING
ElecMcalShock Or Persona/Injury Hazard
Dlsconnect electrlcal supply before servlclng or
cleanlng the unlt. Fallure to do so could result In
electrical shock or personal Injury from cleaner
sudden/ystarting.
Frequently check and remove hair, string and lint
build-up in the brush area. If build-up becomes
excessive, follow the steps below. Should the belt
become loose or should it break, follow the Belt
Removal instructions.
TO REMOVELOWERPLATE:
Disconnect electrical supply.
The handle must be lowered and the cleaner turned
over.
To protect the floor surface, always place paper
under the nozzle any time the lower plate is
removed.
Releasethelower plateby pushing thetabs in
toward the center.
Grasp the clips at the back and pull forward and up
to remove the lowerplate.
Brushor remove any residue that may exist in the belt
area.
Clll_
Pe_onal InjuryHazard
Always unplug the vacuum cleaner before cleaning
the brusharea as brushmay suddenlyrestart.Failure
to do so can resultIn personalInjury.
13