Converting The Lower Element - Kenmore 153.320491 HT Owner's Manual

Installation Instructions (cont'd)
Converting the Lower
Element (cont'd)
9. Tighten terminals 2 and 3 to ensure proper electrical
connection.
AWARNING [
Failure to tighten terminal screws can causea fire which
can result in DEATH, SERIOUS BODILY INJURY. OR
PROPERTY DAMAGE.
10. Replace terminal cover on the thermostat, making sure the
notch is in place over the tab.
Q
_ mI.DG
waa. w
12. The aajustment dial has a "D" shaped opening that matches
a "D" shaped shaft on the thermostat. Align the opening in
the dial to the shaft and gently push the dial onto the shaft.
13. Replace the access panel.
AWARNING [
Make sure the thermostat is flush against the tank, the [
terminal cover is in place, and the insulatmn is replaced. [
Failure to do so can result in DEATH, SERIOUS BODILY
INJURY,OR PROPERTY DAMAGE.
11. Replace the insulation block so that it completely covers the
thermostat and element.
14. Complete wiring to the water heater, or if completed, turn
"ON" electric power to the water heater after filling the
tank with water.
ACAUTION
Never use this water heater unlessit is completely full of [
water, To prevent damage to the tank and heating ele-
ment, the tank must he filled with water, Water must [
flow from the hot water faucet before turning "ON"
power.
12