JVC GR-DV3 Instructions Manual page 24

Scene (5-secondrecerdin9)
Record a vacation fir an important event in S-second clips to keep the action moving. The S-Second
functJrln may also be activated during Full Auto operation. But the _!hJLe Bal_mce rem_fins in the previously
adjusted c_,ldition. While tile S-Second mode is activated, Fade/Wipe (:T* pg. _3), P.AE/Effects (:T* pg. 39)
and other manual operations cannot be perl(_rmed.
Display
Dissolves during 5 second mode recording
Select "SSD" at tile System Menu (_-T _ pg. 32).
"SSD MODE" appears in step 2 below.
Record one S-second clip, and the image at
the end of the clip is stored. If you record the
next clip within 5 minutes, tile previous
scene dissolves as the new scene appears.
• If you turn tile power off, tile stored image
will be lost.
SELECT OPERATION MODE
Turn the Power Dial to "SS" while pressing
down :he lock button lock,ted on the dial.
PULLOUT VIEWEINDER
Pull out tile viewfinder fully. "SS MODE"
appears.
ENGAGE 5S MODE
Then press START/STOP. The tally lamp lights
and beep sounds to indicate tile start of
recording, and after 5 seconds the camcorder
enters Record-Standby mode.
If you press and hold START/STOP within
5 seconds after recording starts, Record-
Standby mode is not engaged.
After 5 sec.
Record-Standby
END 5-SECOND MODE RECORDING
Set tile Power Dial to tile "Q", "_" or "OFF"
position.
To Take A Snapshot In The 5-Second Mode...
.... instead of pressing START/STOP in step 3, press
SNAPSHOT. The camcrlrder records a 6-second
still (_T_ pg. 26). When "SCENE" is set to
"ANIM." ('_ / pg. 32), this function is not
available.
NOTE:
When "SCENE" is set to "ANIM." in the System
Merlu, the _-secorld recording turlctiorl is not
aw_ibble. Animation recordin_ of a 1/8-second clip
is taken instead (_ / pg,. 32).