Firsttrack Recording - JVC NX-CDR7 Instructions Manual

Continued II_
FirstTrack Recording
First Track Recording allows you to record the first track of
each loaded disc in 3-CD Changer.
You can, for example, make a directory of all your best
CDs.
• Usingthe RECMODEbuttonONLY
On the unit ONLY:
Prepare discs in 3-CD Changer.
• If the current playing source is not 3-CD changer,
press CD I_ / II, then II. To select a disc, press DISC
repeatedly, then II.
You can also use the remote control. When using it,
press CD1, CD2, or CD3, then II.
• If the current play mode is either Program Play or
Random Play, press FM/PLAY MODE on the remote
control to select Continuous Play.
Insert a recordable CD-R or CD-RW on the CDR
disc tray.
Press REC SPEED (inside the sliding panel) if
necessary.
• Each time you press the button, recording speed
alternates between normal speed and high speed*.
@00
* For CD-R, 4 times normal speed; for CD-RW, 2 times
normal speed.
When high speed is selected, recording input level is reset
to "0" temporarily, and will not affect the recording.
Press REC MODE (inside the sliding panel) to select
"lst Tr. REC?"
• Each time you press the button, recording modes
change as follows:
_ _'_ AUTO TRACK _
[_, Ill" rm II NORMAL Iw I_
't _2 _3_ SPEED_, oo__ _
RECLEVEL e.la8 °NFINALIZE DISC
................... '_..#
•l ...... l.. l ... l l l i • ,_" l_
i ", i. i r ' ,.
r::
r" i . ,_ "
f _ /\_ --
CD REC?
CD REC & ALIZE?
[ Canceled (back to the beginning)
Press REC START (inside the sliding panel).
• IfOPC (see page 29) is being performed, "UPDATE
OPC" flashes first in the main display, then recording
starts.
NORMAL II1_
"="!=" I';::' =::[':1
.......... . .......... ! iI:. iI:.
Remaining time of the Remaining time in the
currently playing track CD-R/CD-RW
6
After the first track of the disc on the CD1 tray is
recorded, the first track of the CD on the CD2 tray will
be recorded. (If no disc is on the CD tray, it will be
skipped.)
After the first tracks of all loaded discs are recorded,
First Track Recording stops.
Repeat steps 1, 4, and 5 to continuously record more
tracks using First Track Recording.
To confirm the recording contents, see "To change the
display information while recording" on page 32.
To stop recording, press ll. "STOP DUBBING" flashes
for a while.
• Both 3-CD Changer and CD Recorder stop
automatically.
To remove the recorded disc, press • CDR•
"FINALIZE ?" flashes in the main display for a while.
• If you do finalize the disc, press FINALIZE.
Remember once you finalize a CD-R, no further
recording can be made on the disc. (For more details, see
"Finalizing a Disc_D-R/CD-RW" on page 38.)
• If you do not finalize the disc, press • CDR again.
_ If"SHORT REM. OK ?" when
appears you press
REC START
There is not enough remaining time left on the recordable disc.
Eject and change a disc or press REC START one more time to
start recording anyway (the entire track cannot be recorded in this
case).
_ During First Track Recording
Repeat Play will be canceled automatically.
- 35 -