Table of Contents
Advertisement
Continued
I_
The built-in 3-CD Changer
can play back only finalized
CD-Rs/CD-RWs.
If you play back
unfinalized
CDs,
"UNFINALIZE"
appears in the main display.
Loading Discs
On the unit ONLY:
Press one of the open!close
buttons
(A CD1, A CD2,
and A CD3)
for the disc tray you want to load a CD
onto.
i
• If the sliding
panel is left open, it moves
up
The unit automatically
turns on and the selected
disc
tray comes out.
automatically
before the disc
comes
out.
tray
Place a disc correctly
on the
circle of the disc tray, with
its label side up.
Good
No good
• When using a CD single (8 cm), place it on the
inner circle of the disc tray.
Press the same open/close
button (_A CD1, A CD2,
or A CD3) you have pressed
in step 1.
The disc tray closes.
_When
loading more than one disc continuously
Press the open/close button (A CD1, A CD2, or A CD3) for the
next tray you want to place a disc onto. The first disc tray
automatically closes and the next disc tray comes out.
PlayingBackthe EntireDiscs--Continuous
Play
You can play discs continuously.
1
2
Load discs into 3-CD Changer.
Select a disc, and start playback.
On the unit:
1 Press DISC repeatedly
to select the disc you want.
2 Press CD _ / II.
On the remote
control:
Press one of the disc number
buttons
(CD1, CD2,
and CD3).
tl w
l
t
1 ___2 ._ 3._)
:""
r',,
.l
Disc No.
Track No.
"l
.1,
_'_°-,
JI
RECLEVEL_ld_
Elapsed playing time
CD playback starts from the first track of the selected
disc.
• Without selecting the disc number, pressing
CD I_ / II starts playing back the currently selected
CD.
To stop playback
for a moment,
press CD _ / II.
To resume
play, press CD _ / II again.
To stop during
play, press ll.
To remove
the disc, press the corresponding
open/close
buttons
(_ CD1, •
CD2, or •
CD3) on the unit.
_Disc
playback sequence in 3-CD Changer
When 3 discs are loaded on the disc trays, they are played in one
of the following sequences.
• When CD 1 is pressed : CD 1 => CD 2 => CD 3 (then stops)
• When CD 2 is pressed : CD 2 => CD 3 => CD 1 (then stops)
• When CD 3 is pressed : CD 3 => CD 1 => CD 2 (then stops)
• If no disc is on the disc trays, 3-CD Changer skips such an
empty tray.
_Ifthe
current disc is a CD Text
You can change the information in the main display. See "To show
the text information recorded on a CD Text" on page 25.
-21
-
Advertisement
Table of Contents
