Table of Contents
Advertisement
DEM_;;_;
Demonstrates
certain functions
automatically.
Available
when the Power Switch _) is set to "Q"
or "_]" and "DEMO
MODE" is set to "ON" (factory-
preset). Performing
any operation
during the
demonstration
stops the demonstration
temporarily.
Set to OFF to stop completely.
• When a tape whose
erase protection
tab is in the
position
that allows
recording
is loaded in the
camcorder,
demonstration
is not available.
• If you do not detach the Lens Cap, you cannot
see the actual changes
of the Automatic
Demonstration
activated
on the LCD monitor or
viewfinder.
To adjust the brightness
of the LCD monitor,
perform
the following
steps quickly (within approx.
1 second
by each interval):
1} Select "LCD BRIGHT"
in SYSTEM
MENU. The
"BRIGHT
ON" message
appears.
2} Press the BRIGHT
Wheel O in to return to
normal screen.
3} Rotate the BRIGHT
Wheel O to display the
bright level indicator
_.
4} Rotate the BRIGHT
Wheel O until the appropri-
ate brightness
is reached.
After the BRIGHT
Wheel O is released,
the indicator
soon
disappears
and adjustment
is completed.
Allows you to set the current date and time.
(_b. pg. 7)
Advertisement
Table of Contents
