Table of Contents
Advertisement
BASIC FEMURES
5Sec.
Rec
(5.sec.
Recording)
To record a scene for 5 seconds,
providing
quick
scene transitions
like those seen in TV
programmes.
1) Make sure the recording
mode is set to "SP".
2) During Record-Standby,
press 5SEC. REC 0.
im 5S _ appears
and 5Sec. Rec is reserved.
3) Press the Recording
Start/Stop
Button O.
Recording
starts, and after 5-second
recording
is finished,
the camcorder
re-enters
the Record-
Standby
mode automatically.
4) To cancel the 5Sec. Rec. function,
press 5SEC.
REC O again so that i
5S _ disappears.
• Fade/Wipe
(:, _, pg. 23) cannot be activated
by
pressing
5SEC. REC 0.
Backlight
Compensation
To quickly
increase
the brightness
of the subject
relative
to the background.
1) Press BACK LIGHT _) during recording.
"1_" is
displayed
and the subject
is brightened.
2) To cancel
Backlight
Compensation,
press BACK
LIGHT _) again. "1_1" disappears
and the
brightness
returns to the previous
level.
• Backlight
Compensation
functions
in both
recording
modes ("e]"
or "[]').
• Using BACK LIGHT _) may make the subject too
bright, resulting
in a washed
out or white image.
• BACK LIGHT _) cannot be used when the
manual Exposure
Control
mode (:, _, pg. 18) is
engaged.
Auto/Manual
Focus
If correct focus cannot be obtained with Auto
Focus, use Manual
Focus.
1) Set the Power Switch _) to "[]"
while pressing
down the Lock Button (_) located
on the switch.
2) Press []
FOCUS O. ",A_"
appears.
3) To focus on a distant subject,
rotate the MENU
Wheel O upward.
"<" appears
and blinks.
To focus on a close subject,
rotate the MENU
Wheel O downward.
"1_" appears
and blinks.
4) To cancel the Manual Focus, press [] FOCUS
O. ",A,t,,-" disappears
and the Auto Focus is
applied.
• When the focus level cannot
be adjusted
any
farther or closer, ,' ,A" or"-"-"
will blink.
Advertisement
Table of Contents
