Table of Contents
Advertisement
Connections
To A TV/VCR
1) Make sure all units are turned off.
2) Connect
the camcorder
to a TV or VCR using
optional
video and audio cables.
If using both
TV and VCR, connect
the VCR output to the TV
input.
3) Turn on all units. Set the VCR to its AUX input
mode, and set the TV to its VIDEO mode.
• Use the AC Adapter
as the power supply.
• Be sure to adjust the TV sound volume
to its
minimum
level to avoid a sudden
burst of sound
when the camcorder
is turned on.
• If you have a TV or speakers
that are not
specially
shielded,
do not place the speakers
adjacent
to the TV as interference will occur in the
camcorder
playback
picture.
Connector
cover
White to
Audio
Output 0
i---_
Yellow to
Video
Output 0
Tape
Dubbing
1) Connect
the camcorder
and the VCR
(_ _, "Connections
To A TV/VCR").
Set the Power
Switch _) to "PLAY" while pressing
down the
Lock Button (_) located
on the switch, turn an the
VCR's
power, and insert the appropriate
cassettes
in the camcorder
and the VCR.
Engage the VCR's AUX and Record-Pause
modes.
2) Press I_/11 (_) to find a spot just before the edit-
in point. Once it is reached,
press )/11 (_) again.
3) Press I_/11 (_) and engage the VCR's
Record
mode.
4) Engage the VCR's
Record-Pause
mode and
press )/11 qiD.
• Repeat steps 2) through
4) for additional
editing,
then stop the VCR and camcorder
when finished.
AN cable
(optional)
Yellow
to
Video
Input
Advertisement
Table of Contents
