Table of Contents
Advertisement
ADJUSTING
OVEN
OFFSET
TEMPERATURE
The temperature
in the oven has been pre-set at the
factory. When first using the oven, be sure to follow
recipe times and temperatures.
If you think the oven
is cooking too hot or too cool for the temperature you
select, you can adjust the actual oven temperature
to be
more or less than what is displayed. Before adjusting,
test a recipe by using a temperature
setting that is
higher or lower than the recommended temperature. The
baking results should help you to decide how much of an
adjustment is needed.
To adjust
the oven temperature:
1.
Press and hold upper or lower oven BAKE pad for 6
seconds. The preset adjustment
number will appear
and "UPPER" or "LOWER" will flash in the display.
2.
To increase the temperature use the ^
pad to enter the
desired change. The temperature
may be increased as
much as 35°F (19°C). To decrease the temperature use
the v pad to enter the desired change. The temperatu re
may be decreased as much as 35°F (19°C).
3.
Wait 4 seconds to accept the temperature change and
the display will return to the time of day. Press CANCEL
pad to reject the change if necessary.
Each oven temperature can be individually adjusted.
SETTING
SILENT
CONTROL
OPERATION
The DELAY START pad controls the Silent Control Operation
feature. The Silent Control Operation feature allows the oven
control to be operated without sounds or beeps whenever
necessary. If desired the control can be programmed for
silent operation and later returned to operating with all the
normal sounds and beeps.
To change control from normal
sound operation
to
silent control operation:
1.
Press and hold DELAY START pad for 6 seconds. A
beep will sound, "-- --" will appear, "DELAY" will flash
in the display. After 6 seconds, a beep will sound and
"SP" (speaker) or "- -" will appear in the display.
2.
Press A or v
pad to switch between normal sound
operation and silent operation mode.
Note: If "SP" appears, the control will operate with
normal sounds and beeps. If "- -" appears, the control is
in the silent operation mode.
3.
Wait 5 seconds to accept the change or press CANCEL
pad to reject the change.
Note: The control will always beep at the end of a minute
timer and will beep when a set temperature has been reached,
even if the control is set to silent operation.
- The oven temperature adjustments made with this feature
will not change the Self-Clean cycle temperature or the
Broil temperature.
- The oven temperature adjustments are permanent and
will stay forever in the unit memory unless you manually
change it again. Even a power outage will not reset
these changes. Follow the same procedure again if you
wish to change it to a different setting.
SETTING
LOCKOUT
FEATURE
The CANCEL pad controls the Oven Lockout feature.
The Oven Lockout feature automatically
locks the oven
doors (Self-cleaning
ovens only)
and prevents the
oven from being turned on. It does not disable the
display of the clock, the minute timer or the interior
oven lights.
To activate
the Lockout feature:
Make sure the oven doors are closed. Press and hold
pad for 3 seconds. After 3 seconds a beep will sound,
"DOOR", "LOCKED" will flash, "Loc" and t_t will appear in
the display. Once the oven door is locked the "DOOR" and
"LOCKED=`indicator will stop flashing and remain in the
display.
To reactivate
normal operation:
Press and hold _ pad for 3 seconds. A beep will sound.
The oven icon, "LOC" and t_ will disappear from the
display. "DOOR" and "LOCKED" will flash in the display
until the oven door has completely unlocked. The
appliance is again fully operational.
Advertisement
Table of Contents
