Lubrication; Energy Saving Tips - Hoover Concept One Manual

Always identify your cleaner by model number when requesting informa-
tion or ordering replacement parts. (The model number appears on the
bottom of the cleaner.)
If further assistance is needed, contact The Hoover Company Con-
sumer Affairs Department, North Canton, Ohio 44720, 216-499-9200.
Lubrication
The motor is equipped with one ball bearing and one needle roller bear-
ing. These bearings contain sufficient lubrication for the life of the motor.
The addition of lubricant could cause damage. Therefore, do not add
lubricant to either motor bearing.
The agitator is equipped with two ball bearings that should be lubricated
periodically. This should be done by a Hoover Factory Branch Service
Center or an Authorized Hoover Warranty Service Dealer.
Energy saving tips
1. Replace throw away cleaner bag promptly, before overfilled, with a
genuine HOOVER bag made for your cleaner model.
2. To maintain effective cleaning, replace agitator brushes and belt when
necessary,
3. Turn off cleaner when not in use, such as when moving furniture.
4. Keep your cleaner operating at peak performance level - have inspec-
tion and service performed by a Hoover Factory Service Center or
Authorized Hoover Service Dealer.
22