Table of Contents
Advertisement
,.u
NOZZLE
Adjustment
for carpet
pile height
The
cleaning
of carpet
and rugs
takes place at the nozzle.
This is
the opening
at the bottom
of the
cleaner where
the agitator
is lo-
cated.
It is necessary
for the nozzle to be
adjusted
properly
to the various
carpet
pile heights.
The adjust-
ment lever on the front
of the
cleaner
may be set on three differ-
ent self-adjusting
ranges.
On very dense
pile plush or shag
carpet,
some difficulty
in pushing
the cleaner
may occur.
In this
case, position
the adjustment
le-
ver on PLUSH
or SHAG.
When
cleaning
non-carpeted
floors,
set
adjustment
lever to LOW/MEDI-
UM and use Normal
Speed.
Be-
cause of the vigorous
action
of
the agitator,
do not allow
cleaner to run in a stationary
position
on any floor covering,
as
marring
may occur.
Disconnect
cleaner
from electri-
cal outlet
before
making
nozzle
adjustment.
To change
the nozzle adjustment
grasp the handle
and tilt the
cleaner forward.
Move the lever
with
your hand until it "clicks"
in-
to the desired
position.
Air freshener dispenser
Lift drawer
in the bag cap of your
cleaner and insert the air freshener
tablet
that has been packed
with
your cleaner.
Push drawer
down
into position.
Hide quick links:
Advertisement
Table of Contents
