Hoover SteamVac SpinScrub Owner's Manual page 6

Deep Cleaner Description
P',ll
1
21_'3
13
4
24
16
18
21
The
assembled deep cleaner will look like the drawing.
1. Hand grip
2. Solution trigger: press to
release clean solution.
3. Clean Surge
TM
button
4. Hose
5. Hose holder:
wrap hose
around holder and top hose
hook (6) for storage.
6. Hose hook
7. Cord hooks:
wrap cord
around hooks for storage.
The
top hook can be rotated
right or left for quick and
easy cord release.
8. Scrub module
9. Powered hand to01
10. Carrying handle
11. Clean solution tank handle
12. Clean solution tank cap/
measuring cup
13. Clean solution tank: holds
cleaning solution.
14. Recovery tank handle:
raise handle to unlock tank
for removal; lower handle
forward to lock tank into
position.
15. Recovery tank:
holds
dirty
solution.
16. Brush speed selector:
slide selector to set brush
speed on HI, LO, or OFF.
17. MAX Extract
TM
Indicator
18. Hood
19. Headlight: on both
sides of
the hood
20. Edge bristles: on
both sides
of the hood for cleaning
close to edges of carpet.
21. Nozzle
22. Cleaning mode indicator:
shows either floor or tool
usage
23. ON/OFF pedal
24. Handle release pedal: step
on pedal to lower handle to
operating (floor) position;
25. Stair/upholstery nozzle
26. Crevice tool
27. Bare floor attachment
This deep cleaner is intended
for household use.
Operate deep cleaner only at voltage specified on data plate on back of cleaner.
Plug deep cleaner into a properly grounded outlet.
t
ON/OFF
pedal
Handle release pedal
Step on pedal (A) to turn deep cleaner
on. Step on pedal again to turn deep
cleaner off.
Step on pedal (B) to lower handle to
operating position. Handle does not lock
into a single position but "floats" to allow
convenient operation.
Cleaning mode
indicator
Indicator will show a green window next
to
FLOOR (C)
when handle is in the
operating position for cleaning carpet
rugs and bare floors.
Indicator will show a green window next
to
TOOL (D)
when handle is in the
upright position for tool use on stairs,
upholstery, etc.
Deep cleaner
automatically diverts
suction from FLOOR toTOOL when
handle is raised from the operating to
the upright position.
To transport
To move your deep cleaner from room to
room put handle in upright and locked
position tilt deep cleaner back on
wheels and push forward,