INSTALLSEAL
GASKET
efficiency.
Models
HWRIOXC3-T
HWRI 2XC3-T
I
PREPARE UNIT
FOR
INSTALLATION
Unpack unit on floor next to
installation location,
Remove front attachment screw
Separate _he outercase from the front
with a putty knife atthe catch paints
designated by the arrows.
Remove one screw securing
basepan locking bracket, Remove
two screws located in the rear of the
outercase, securing basepan to
outercase Using the bcssepan handle,
slowly and evenly pull chassis out
from outer case.
No_e: Cover puffy knife blade wlth
masking tape to guard against
damage of Ihe units finish. The filter
is removed in shis illustration br
Caution: Never expose plastic
clarity only.
front or grille to extreme
temparateres,
2O