Haier HWR08XC3T User Manual page 10

Fig. # 2
Control
After you plug in the unit it will perform a self test. All the display lights
will turn on for 3 seconds. The LED display will read "88". If any display
light fails to turn on you may need service on the unit. After the 3 seconds
self test the unit will automatically go to the stand by mode. Now all lights
will be off and you will have to turn "ON" by pressing the On/Off key.
After pressing "On/Off", the unit starts to work and enters the status of
"Fan Only" with low setting. You will have to press the (+) or (-) key on the
Temp/Time to set the temperature at your desired comfort. You can choose
between 61 °F and 86°F. Once the temperature is set you can raise or
lower it by pressing the (+) or (-) keys. (Only when the unit is cooling or
dehumidifying, can the temperature setting be adjusted.) (See Fig. # 2)
Panel.
Having set the temperature you
will
set the function of the air conditioner.
If you want to cool the room press the A/C function. If you need to only
remove the moisture press the Dehumid function. If you just need to use the
fan only, press the Fan function. (See Fig. # 3)