Page 8
4.Timer Your air conditioner can be set to go on or off at your desire. This can be programmed up to 24 hours in advance. 5.4-Way Air Flow The air directional louvers let you control the direction of the airflow to the desired direction.
Page 9
6. Window Install Kit This kit enables you to install the air conditioner in a double hung window. Extra brackets or support may be needed, depending on your window. 7.Remote Control This fully functional wireless remote allows you to operate your air conditioner from a distance.
Page 10
The following sounds are normally heard during the operation of an air conditioner. Cool airflow movement as dictated by the set fan speed. Water sounds. This is normal since your air conditioner also acts as a dehumidifier. Thus you will hear water sounds from water drops falling on the condenser.
Page 11
( ) or ( ) keys.The temperature setting can only be adjusted when the unit is in cooling, energy saver, or dehumidifier. (See Fig. #2) Having set the temperature, you will set the function of the air conditioner. Every time you press the MODE button, it will change between FAN, COOL, ENERGY SAVER and DEHUM.
Page 12
Once the mode function is established, you will have to set the fan speed. (See fig. #4) Every time you press the SPEED button, fan speed will change between LOW, MED, and HIGH. 1) If you choose the COOL mode you can run the fan in one of the 3 speeds: HIGH, MED, or LOW.
Page 13
Timer On or Timer Off mode is used to pre-start or shut off your unit in advance. You can program this up to 24 hours in advance. You can use the Timer in 4 functions, i.e. COOL, ENERGY SAVER, DEHUMID or FAN. Timer on (See Fig.#5) The unit must be on to set the timer.
Adjusting the Air Flow Direction Airflow can be adjusted by changing the direction of the air conditioner's louvers. This can also increase the cooling efficiency of the air conditioner. Adjusting Horizontal Air Flow Direction Adjusting the vertical louvers left and right will change horizontal airflow.
Page 15
The air conditioner must have a clear, unbostructed airflow through the condenser to remove heat. 2) The window is strong enough to hold the weight of the air conditioner. Extra brackets or supports may be needed depending on your windows. (Brackets or supports not provided in all models) 3) The windowsill and track are strong enough to hold the weigh of the air conditioner.