Goldstar GWHD6500R Owner's Manual page 23

Maintenanceand Service
n The air conditioner is • Make sure the air conditioner plug is
unplugged, pushed completely into the outlet.
breaker box and replace the fuse
Air or reset the breaker.
conditioner -i_;_er°fai_ure_ ....... o If power failure occurs, turn the
does not mode control to Off.
start When power is restored, wait 3
minutes to restart the air
conditioner to prevent tripping of
the compressor ovedoad.
II The currentinte_pter • PresstheRESET button _ed onthe power
Air
conditioner
d_s not
cool _ it
should
II Airflow is restricted.
I The thermostat may not
cord plug.If theRESET bL,_ton willnotstay
enga_, d_ntinue u_ of theair_dit_one_
•_dcontact
a qualified ser¢i_techni_n.
• Make sure there are no cumins,
blinds, or furniture blowing the
front of the air conditioner.
• Turn the knob to a higher number.
_e highest setting provides
maximum cooling.
II The room may have been
hot,
II Cold air is escaping.
weeks.
See the care and Maintenance
section.
When the air conditioner is first
turned on, you need to allow time
for the room to _1 down.
Ch_k for open furnace floor
registers and cold air returns.
below.
Air !! Ice iblocks the air flow and ,, Set the mode control at High Fan
conditioner stops the air conditioner or High Cool with thermostat at 1
freezing up from cooling the _m. or 2.
* You can refer to the Energy Star p_m in detail at www.energystat.gov.
Owner'sManual 23