Table of Contents
Advertisement
Assembly
UNPACKING
Unpack the product where you will be using it. Place the product
on a level flat surface. It is recom-
mended that you place a protective
covering on your floor. Note. It is recommended
that you apply
grease to the threads of each bolt as you assemble the product,
to prevent loosening and noise. Also,
during each assembly step, ensure that ALL nuts and bolts are in place and partially
threaded
in
before completely
tightening
any ONE bolt.
FAILURE TO FOLLOW THESE INSTRUCTIONS
COULD RESULT IN INJURY! Place your elliptical
trainer on a level flat surface.
It is recommended
that you place a protective
covering on your floor.
E51/E52
PARTS (see illustration
on previous page)
° 1 Front Foot Tube
° 2 Upper Handlebars
° 2 Lower Handlebars/Link
Arms
° 2 Pedal arms
° 2 Guide Rails
° 1 Console Mast
° 1 Console Mast Boot
° 1 Power Supply (E52 model only)
° 1 Tension Knob (E51 model only)
° 2 Pedal Arm Sleeves
° 2 Crank Boots
° 2 Front Upper Handlebar
Covers
° 2 Back Upper Handlebar
Covers
° 1 Hardware Pack
E531E54HR
PARTS (see illustration
on previous page)
• I Front Foot Tube
• 2 Upper Handlebars
• 2 Lower Handlebars
• 2 Pedal arms
° 2 Guide Rails
° 1 Console Mast
° 1 Console Mast Boot
• 1 Power Supply
• 1 Audio Wire (E54HR
model only)
° 2 Crank Boots
° 2 Front Upper Handlebar
Covers
° 2 Back Upper Handlebar
Covers
° 2 Footpads
• 2 Pedal Link Arms
° 1 Hardware Pack
TOOLS (included)
• 4mm Allen Wrench
• 5mm Allen Wrench/Phillips
Screw Driver
• 13/15mm
Flat Wrench
• 17mm Wrench
TOOLS (included)
• 4mm Allen Wrench
• 5mm Allen Wrench/Phillips
Screw Driver
• 13/15mm
Flat Wrench
• 17mm Wrench
If you have any questions,
or if there are any missing parts, we will guarantee
complete
satisfaction.
PLEASE CALL OUR TOLL-FREE
DIRECT CUSTOMER ASSISTANCE
CENTER @ 1-800-244-4192
Mon.-Fri.,
8 a.m.-5
p.m. CST (excluding
holidays).
8
Hide quick links:
Advertisement
Table of Contents
