Table of Contents
Advertisement
Vew!_gF'c_
_es(_ aC(_
_p_te
4 Remove the installer CD from the CD-ROM drive. Note that you may be
unable to remove the CD if Safari is running; if necessary, quit Safari before
removing the CD. Store the installer CD in a dry location out of direct sun-
light in case you need to re-install the software.
5 MacOSX 10.5 or earlier: Open the "Applications"folder,
start Image Capture,
and select Preferences...
from the Image Capture application
menu. The
Image Capture preferences dialog will be displayed; choose Other...
in
the When a camera is connected, open menu, then select FPVBridge in
the "Applications/FinePixViewer"folder
and click Open.
Quit Image Cap-
ture.
MacOSXlO.6: Connect the camera and turn it on. Open the "Applications"
folder and start Image Capture. The camera will be listed under DEVICES;
select the camera and choose FPVBridge from the Connecting this cam-
era opens menu and click Choose. Quit Image Capture.
Installation is now complete.
Proceed to"Connecting
the Camera"(_
71).
Advertisement
Table of Contents
