_Viewing
Pictures
on Hiqh-Definition
TVs
The camera can be connected to High-Definition
(HD) devices using an HDMI
cable (available separately from third-party
sources).
1 Turn the camera off and connect the HDMI cable as shown below.
Micro HDMI connector
insert into HDM/
connector
Insert into HDMI
connector
(J:> When corlrlecting cables, be sure tile connectors are fully inserted.
When an HDMI cable is connected, pictures and sound are played back on tile
TV.
2 Tune the television
to the HDMI input channel. See the documentation
supplied with the television for details.
3 Press the []
button for about a second to turn the camera on. The camera
monitor turns offand pictures and movies are played back on theTV. Note
that the camera volume controls have no effect on sounds played on the
TV; use the television volume controls to adjust the volume.
_, Tile USBcable carl not be used while an HDMI cable is connected.
Some televisions
may briefly display a black screen when movie playback be-
girls.
( ( ] ]
:
/> ] f,