Movie Edit - FujiFilm FINEPIX XP160 Owner's Manual

;stg tie
L_e_us: P ayback L/ode
Edit movies.
• MOVIETRIMMING
Remove opening or ending footage to create an edited copy of the current movie.
1 Display the desired movie.
2 Select [] MOVIE EDIT > MOVIE TRIMMING in the playback menu.To remove footage from
the start of the copy, proceed to Step 3; otherwise, proceed to Step 4.
3 Press the selector down to begin playback and press it down again when the new opening
frame is reached.
4 Press MENU/OK To remove footage from the end of the copy, proceed to Step 5; otherwise,
proceed to Step 6 (to exit without creating an edited copy, press DISP/BACK).
5 Press the selector down to begin playback and press it down again when the new closing
flame is reached.
6 Press MENU/OKto save the copy.
• MOVIEJOIN
Add existing footage to the end of the current movie to create an edited copy.
1 Display the desired movie.
2 Select [] MOVIE EDIT > MOVIE JOIN in the playback menu.
3 Press the selector left or right to highlight a movie.
4 Press MENU/OKto add the highlighted footage to the end of the current movie and save the
resulting copy, or press DISP/BACK to exit without creating a copy.
_, Both movies must have been recorded at the same flame size and flame rate.
83