4 Close and latch the battery-chamber
cover.
Close the cover ((_) and then close the latch
((_) and safety lock ((_).
(!) Before closing the cover, confirm that there is
no dust, sand, or other foreign matter on tile
water-resistant sealor adjacent surfaces.
(!) When closing the battery-chamber cover, do
not subject it to excessive horizontal forces.
Failure to observe this precaution could cause tile water-resistant seal to be-
come misaligned, allowing water into tile camera.
_
ConfirmingThat the CoverIs Latched
Make sure that tile strap is not caught
in tile cover and that
both the latch and safety lock are closed.
• Correct
• Incorrect
The yellow _ticker i_ not visible.
The yellow _ticker i_ visible.
12
(:
t S'::