FujiFilm FINEPIX J38 Owner's Manual page 94

14,'_;minq A ,@ss_,_g_*s _md D spks'ys
Warning Description Solution
Format the memory card and select RENEW for the
[] FRAME NO. option in the @ SETUP menu. Take
The camera has run out of frame numbers
FRAME NO,FULL current frame number is 999-9999). a picture to reset frame numbering to 100-0001,
then return to the [] FRAME NO, menu and select
CONTINUOUS.
TOO MANYFRAMES Date for which more than 4,999 pictures exist Choose a different date.
selected in sort-by-date view.
CAN NOT EXECUTE
CAN NOT E XECUTE
PROTECTED FRAME
_NOIMAGE
II_INOIMAGE
I_ZlCANNOTTRIM
CAN NOTTRIM
DPOF F ILE ERROR
CAN NOTSET DPOF
CAN NOT S ET D POF
CAN NOT R OTATE
CAN NOT ROTATE
PRESS AND HOLD T HE DISP
BUTTON TO DEACTIVATE
SILENTMODE
COMMUNICATION ERROR
Red-eye removal can not be applied to the
selected picture or movie.
An attempt was made to delete or rotate a
protected picture.
The source device selected in the playback
COPY menu contains no pictures.
An attempt was made to crop a _ picture.
The picture selected for cropping is damaged
or was not created with the camera.
The DPOF print order on the current memory
card contains more than 999 images.
The picture can not be printed using DPOF.
Movies can not be printed using DPOF.
The picture can not be rotated.
Movies can not be rotated.
An attempt was made to choose a flash
mode or adjust the volume with the camera
in silent mode.
A connection error occurred while pictures
were being printed or copied to a computer
or other device.
Remove protection before deleting or rotating
)ictures.
Select a different source.
These pictures can not be cropped.
Copy the pictures to internal memory and create a
new print order.
Exit silent mode before choosing a flash mode or
adjusting the volume.
Confirm that the device is turned on and that the USB
cable is connected.
88