Maintenance - Haier XQBM22-C User Manual

4.Wash Sequence
A. Connect water inlet hose m_d drain hose as explained in the "Installation Instructions"section.
B. Plug machine into a properly grounded electrical outlet.
C. Turn on the water to faucet. (Note: Use cold or warm water. Do not use very hot water as it may damage
machine.)
D. Load garments into machine.
E. Select water level.
E Push in selector knob and turn it clockwise to desired wash cycle. Pull knob out to start machine.
G. Add laundry detergent and close lid.
H. When wash cycle is complete, a buzzer will sound and machine will shut off. At this time push selector
knob in, turn off tap water and unplug machine.
I. Remove gm-ments from machine.
J. Turn off tap water and unplug machine.
K. When disconnecting inlet and drain hoses, please be aware that some residual water may spill. Have
dish rags on hand for any accidental spills. Hang hoses from hole on side of machine.
Maintenance
1. Lint Trap
The XQBM22-C has a lint trap. Please remove and clean trap after each use or whenever it accumulates
lint.
2. Water Inlet Valve
Over time the screen in"Water inlet valve"can accumulate dirt and debris and clog. Additionally, lime
and other sediments in water can accumulate and form a crust around valve. Periodically,clean water inlet
valve and screen with a small brush or toothbrush and rinse.
3. Cleaning The Cabinet
Periodically clean the cabinet with a soft cloth and mild detergent. Do not use thinners, gasoline or other
strong solvents.