Maintenance - Haier HWM160-B1678S Owner's Manual

Top load fully automatic washing machine
Table of Contents

Advertisement

Operation & Wash Cycles
7
Press the
button to start the cycle
14

Maintenance

Remove the power plug before carrying out any cleaning or maintenance.
Clean the lint filter(s) and detergent box after each wash,otherwise it may influence
you using the machine.
Clean the detergent box and set it
on the control panel seat.
1.The method of dismantle:
Tilt upwardand gently pull out.
1.Push down spring piece of the top lint
2.The method of clean: Use a brush
and duster cloth to clean it,
then flush it with water.
3.The method of install : Install it
upwards and aslant and push it in.
Remove
The filter at the water inlet valve may
become blocked by impurities in the
water supply.Clean it with a plastic
bristled brush every two months.
If the cabinet is dirty,wipe it with a damp cloth
Do not wash directly with water.
Wipe with a neutral detergent(please check
directions on detergent bottle first).
Do not wipe machine with thinners,petrol,
alcohol or other hash solvents.
1.After washing cycle has finshed,turn off the water faucet.(If needed,you can remove
the water inlet hose).
2.Do not store water in the washing machine for a long period without completing a
wash cycle.Drain the water completely after each wash.
3.Hang up the power cord and drain hose.
4.Wipe up any drops of water on the surface of the machine and inside the tub.Leave
the lid open for about 1 hour after each wash to evaporate any residual water.
Both lint filters must be used during washing.
Tilt upward must be cleaned after each use
and re-install the lint filters as follows:
filter ,and pull out to remove.(figure1)
2.Pull the back of the lint filter to open
(figure2)
3.Remove any lint in the lint filter.
4.Push the back of the lint filter back into the
front cover.
5.Put the lint filter into filter housing ,
and make it tight.
6.Make sure the lint filter is well installed,or
it can influence performance of the washer.
The front cover of the lint filter
The back cover of the lint filter
Up
Push
Dismantle
Install
Down
Down
Figure 1
Figure 2
15

Advertisement

Table of Contents
loading

Table of Contents