Haier XQG50-11 User Manual page 23

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii _i; _i; _i;_i;_i; _i;_i;_i; _i; _i; _i;_i;_i; _i;_i;_i; _i; _i;_i;_ii_i_
Unpacking
Your
Appliance
• Remove all packing materialsincludingtransportation boltsand brackets. Also
remove adhesive tape holding the accessoriesinsideand outside,
• Inspect and remove any remains of packing, tape or printed materials before
using the washer.
• Remove 2 bolts, 4 screws and 1 center bolt holding metal bracket from the back
of the unit that are installed to protect drum and internal components from dam-
age during shipping, (Wrench is included in the instruction manual bag)
• Screws and Bolts must be removed before using the machine. Once removed,
save them so when moving you can reinstall to protect the machine from damage
during shipping.
• Once you remove the bracket, reinstall bracket screws, for center bolt and 2 side
bolts. Use supplied plastic plugs to prevent damage to the machine,
Center bolt
(use plastic plug) (not shown)
Screws Screws(2)
Bolt
(use plastic plugs)
-Bolt
(use plastic plugs)
22