Intel VS440FX Technical Specification page 58

VS440FX Motherboard Technical Product Specification
NOTE
If you specifically set either serial port address, that address will not appear in the list of options
for the other serial port.
3.15.7.6 Parallel Port Address
Selects the logical printer port, I/O address, and IRQ of the parallel port. The options are:
Disabled
LPT3, 3BCh, IRQ7
LPT1, 378h, IRQ7
LPT2, 278h, IRQ7
LPT3, 3BCh, IRQ5
LPT1, 378h, IRQ5
LPT2, 278h, IRQ5
Auto (Setup assigns LPT1, 378h, IRQ7) (default)
3.15.7.7 Parallel Port Mode
Selects the mode for the parallel port. The options are:
Compatible (operates in AT
Bi-directional (operates in bidirectional PS/2-compatible mode)
EPP (Enhanced Parallel Port, a high-speed bidirectional mode)
ECP (Extended Capabilities Port, a high-speed bidirectional mode)
3.15.7.8 Primary IDE Status
Reports if the primary IDE interface is enabled or disabled. There are no options.
3.15.7.9 Secondary IDE Status
Reports if the secondary IDE interface is enabled or disabled. There are no options.
3.15.7.10 Floppy Status
Reports if the diskette drive interface is enabled or disabled. There are no options.
3.15.7.11 Serial Port 1 Status
Reports the COM port, I/O address, and IRQ for Serial Port 1. There are no options.
3.15.7.12 Serial Port 2 Status
Reports the COM port, I/O address, and IRQ for Serial Port 2. There are no options.
3.15.7.13 Parallel Port Status
Reports the logical printer port, I/O address, and IRQ for the parallel port. There are no options.
58
†
-compatible mode) (default)