Dry Temp; Start/Pause; My Cycle; Display - GE Profile DPVH890 Owner's Manual & Installation Instructions

ge.com
Dry Temp
You can change the
ANTI-BACTERIAL
HIGH
MEDIUM
LOW
EXTRA LOW
START/PAUSE
temperature of your dry cycle.
This option may only be used with COTTONS or MIXED LOAD cycles. This option reduces
certain types of bacteria by 99.9%, including: Stophylococcus oureus, Pseudomonos
oeruginoso and Kle6siello pneumonioe*. The anti-bacterial process occurs when high
heat is used during a portion of this drying cycle.
NOTE: Do not use this cycle on delicate fabrics.
* The Anti-Bacterial Cycle is Certified by NSF International (formerly National Sanitation
Foundation) to NSF Protocol P154 Sonitizotion Performonce of Residentiol Clothes Dryers.
i
Sanitization Perfbrmance oi
Residential Clothes Dryers
For regular to heavy cottons.
For synthetics, blends and items labeled permanent press.
For delicates, synthetics and items labeled Tum61eDry Low.
For lingerie and special-care fabrics.
Press to start a dry cycle. If the dryer is running, press it once and it will pause the dryer.
Press it again to restart the dry cycle.
MY My Cycle (on some models)
CYCLE
Set up your favorite combination of settings and save them here for one touch recall.
These custom settings can be set while a cycle is in progress.
To store a NY CYCLEcombination of settings:
£ Select your drying cycle.
2. Change DRY TEPlPand SENSORDRY LEVEL settings to fit your needs.
3. Select any drying OPTIONSyou want.
4. Press and hold the PlYCYCLEbutton for 3 seconds to store your selection. A beep will sound
and the button will light up.
To recall gour stored PIY CYCLEcombination:
Press the PlY CYCLEbutton before drying a load. The light around the button will light up when
PlY CYCLEis selected.
To change your stored PlY CYCLE combination:
Follow Steps 1-4 in "To store a PlY CYCLE combination of settings."
Display
SpecialCycleStatusOR
DryerRackORTimedDry
Est.CycleTime
ORTimlt0 Dry
4(
' Time Lint FilterStatus DELAY TIME
Status Screen
"CLEAN LiNT FILTER" (message)
This message stags on for 15 minutes after the cycle finishes. This message is only a reminder.