Dry Cycles; Timed Dry - GE GFDN240 Owner's Manual

Hide thumbs Also See for GFDN240:
Table of Contents

Advertisement

About the dryer control panel.
1
Power
Press to "wake up" the display. If the display is active, press to put the dryer in the standby mode.
NOTE: Pressing POWER does not disconnect the appliance from the power supply.
2

Dry Cycles

The dry cycle controls the length and tumble speed of the drying process. The chart below will help you match the dry
setting with the loads.
Sensor Cycles
COTTONS
NORMAL/MIXED LOADS
EASY CARE
ACTIVE WEAR
DELICATES
SPEED DRY
Timed Dry Cycles
WARM UP
AIR FLUFF
DEWRINKLE
(on some models)
STEAM REFRESH
(on some models)
STEAM DEWRINKLE
(on some models)
My Cycle
MY CYCLE
3

Timed Dry

Use to set your own dry time. TIMED DRY is also recommended for small loads
To use TIMED DRY:
1. Turn dry cycle dial to TIMED DRY.
2. Increase the drying time by pressing the TIMEDRY ADJUST
Note: This button only increases the time. When max time is reached, pressing the button again will reset the counter to
the lowest setting.
3. Select the TEMP.
4. Close the door.
5. Press Start
Description
For cottons and most linens.
For loads consisting of cottons and poly-blends.
For wrinkle-free and permanent press items.
Clothing worn for active sports exercise and some casual wear. Fabrics include new
technology finishes and stretch fibers such as Spandex.
For lingerie and special-care fabrics.
For small loads that are needed in a hurry, such as sports or school uniforms. Can also be
used if the previous cycle left some items damp, such as collars or waistbands.
Description
Provides 10 minutes of warming time to warm up clothes.
Use this feature to tumble items without heat.
For removing wrinkles from items that are dry or slightly damp. This cycle is not
recommended for delicate fabrics.
For slightly wrinkled dry garments. Significantly reduces wrinkles on up to 5 garments. After
the STEAM REFRESH Cycle, the unit will beep and display "0:00." If the unit is not turned off
or if the door is not opened, the dryer will continue to tumble for 30 minutes. At the end of 30
minutes, it will display "0:00" and the cycle will be complete.
Note: A single extremely light fabric item may need to have an additional item included in the
STEAM REFRESH cycle to achieve optimum results.
For use with larger loads than STEAM REFRESH. Ideal for loads left in dryer for an extended
time.
Description
Press to use, create or modify custom dry cycles. (See page 8 for more details)
+
button.
www.GEAppliances.ca
23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gfdn245Gfds350Gfmn245Gfds355Gfms350Gfms355 ... Show all

Table of Contents