Replacing The Motherboard - TYAN Transport GS14 (B5121G14S2 Manual

6.8 Replacing the Motherboard

1. Remove the cabinet cover (see the previous section in this chapter).
2. Remove the primary HDD (see chapter 2 on Installing a Hard Disk Drive).
3. Remove the secondary HDD (see chapter 7 on Adding a Secondary Hard Disk
Drive).
4. Remove the power supply (see the previous section in this chapter).
5. Remove the heatsink and CPU from its socket (see chapter 2 on Installing the CPU).
6. Detach the DIMM from the socket on the motherboard.
7. Detach the riser card from the PCI slot on the motherboard.
8. Remove the four hex screws on the serial and VGA ports on the rear panel.
9. Remove the seven screws securing the motherboard to the system chassis. Then
remove the motherboard.
Reverse the above sequence when installing the new motherboard.
60
http://www.TYAN.com