Table of Contents
Advertisement
POST (hex)
47h:
49h
4Eh:
50h:
52h:
53h:
55h:
57h:
59h:
5Bh:
5Dh:
60h:
63h:
65h:
67h:
69h:
6Bh:
6Dh:
6Fh:
75h:
76h:
Description
Initialize EISA slot
1. Calculate total memory by testing the last double word of
each 64K page.
2. Program write allocation for AMD K5 CPU.
1.
Program MTRR of M1 CPU
2.
Initialize L2 cache for P6 class CPU & program CPU
with proper cacheable range.
3.
Initialize the APIC for P6 class CPU.
4.
On MP platform, adjust the cacheable range to smaller
one in case the cacheable ranges between each CPU
are not identical.
Initialize USB Keyboard & Mouse.
Test all memory (clear all extended memory to 0)
Clear password according to H/W jumper (Optional).
Display number of processors (multi-processor platform)
1.
Display PnP logo
2.
Early ISA PnP initialization
- Assign CSN to every ISA PnP device.
Initialize the combined Trend Anti-Virus code.
(Optional Feature)
Show message for entering AWDFLASH.EXE from FDD
1. Initialize Init_Onboard_Super_IO
2. Initialize Init_Onbaord_AUDIO.
Okay to enter Setup utility; i.e. not until this POST stage
can users enter the CMOS setup utility.
Reset keyboard if Early_Reset_KB is not defined.
Initialize PS/2 Mouse
Prepare memory size information for function call: INT 15h
ax=E820h
Turn on L2 cache
Program chipset registers according to items described in
Setup & Auto-configuration table.
1. Assign resources to all ISA PnP devices.
2. Auto assign ports to onboard COM ports if the
corresponding item in Setup is set to "AUTO"
1. Initialize floppy controller
2. Set up floppy related fields in 40:hardware.
Detect & install all IDE devices: HDD, LS120, ZIP,
CDROM... ..
(Optional Feature)
Enter AWDFLASH.EXE if:
-AWDFLASH.EXE is found in floppy drive.
-ALT+F2 is pressed.
http://www.tyan.com
66
Advertisement
Table of Contents
