Table of Contents
Advertisement
Wake-Up by PME# of PCI
When set to [Enabled], access to the onboard LAN or a PCI card such as a
modem or LAN card will cause the system to wake up. The PCI card must
support the wake up function.
WakeUp by Alarm
When set to [Enabled], you can set the date and time you would like the Soft-
Off PC to power-on in the "Date (of Month) Alarm" and "Time (hh:mm:ss) Alarm"
items. However, if the system is being accessed by incoming calls or the
network (Resume On Ring/LAN) prior to the date and time set in these items,
the system will give priority to the incoming calls or network instead.
- Date (of Month) Alarm
[0]: This option power-on the system everyday according to the time set in the
"Time (hh:mm:ss) Alarm" item.
[1-31]: This option selects a date you would like the system to power-on. The
system will power-on on the date set, and the time set in the "Time (hh:mm:ss)
Alarm" item.
- Time (hh:mm:ss) Alarm
This item sets the time you would like the system to power-on.
56
http://www.tyan.com
Advertisement
Table of Contents
