Surface Units; Drip Pans; Lift-Up Cooktop - GE JMS08 Owner's Manual

ge.com
Be sure the controls are turned to OFF and the surface units are cool before attempting to remove them.
Surface unE \
Receotaole
DrioDan
Surface Units
To dean die surface units, turn die
control to tile highest setting for a
minute. The coils will burn off any soil.
Toremove a surface unit:
To remove tile drip pans for cleaning,
the surface units must be removed fi_t.
I,ift file surface unit about 1" above file
drip pan and pull it out.
Do not lift the surfaceunit more than 1".
If you do, it may not lie fiat on the drip pan
when you plug it back in.
Repeated lifting of file surface unit more
than 1 inch above the drip pan can
permanently damage the receptacle.
To replace a surface unit:
Replace file drip pan into the recess in
file cooktop. Make sure the opening in
file pan lines up with the receptacle.
Insert die mmfinals of file surface unit
through the opening in the drip pan and
into the receptacle.
Guide file surfi_ce unit into place so it
rests evellly.
Do not immerse the surface units in liquids of
any kind.
Do not dean the surfaceunits in a dishwasher.
Donotbendthesurfaceunitp/ugterminals.
Donotattempttodean,adjustor in anyway
repairtheplug-inreceptacle.
Drip Pans
Remove file surface units. Then lift out
the drip pans.
For best results, clean file drip pans by
band. Place them in a covered container
(or a plastic bag) with 1/4 cup ammonia
to loosen the soil. Then scrub with a
soap-filled scouring pad if necessa_ y.
Rinse with clean water and polish with a
clean soft cloth.
The drip pans may also be cleaned in
a dishwasher.
Clean die area under file drip pans
often. Built-up soil, especiaUy grease,
m W catch fire.
Donotcoverthedrippanswith foil. Usingfoil
sodose to thereceptacle couldcause shock,
fireor damage to therange.
Be sure all surface units are turned
off before raising the cooktop.
Lift-Up Cooktop
Clean the area under the cooktop often. Built-up
soil, especially grease,may catch fire.
To make cleaning easier; the entire
cooktop may be lifted up and supported
in the up position.
Be sure all the surface traits are turned
off before raising the cooktop. The
surface units and drip pans do not need
m be removed, however; you may remove
one m make raising the cooktop easier.
Af_er cleaning under file cookmp with
hot, soapy water and a clean cloth, lower
the cooMop. Be carefifl not m pinch
your finge_s.
I3