Names And Functions Of Controls And Connectors; Front Panel - Zoom 2020 Operation Manual

Names and Functions of Controls and Connectors

Front Panel

COMP+ DIST
EFFECT 1 CLN I
2 CLN II
COMP
PARM1
[0-3]
PARM2 EDGE
[0,1]
(9)
PARM3
ZNR
PARM4
[0-15]
PARM5
1
COMP
(8)
ZOOM
ADVANCED GUITAR EFFECTS PROCESSOR
(1) Display
The display shows vital information for operating the 2020,
such as group and bank numbers of a patch, effect parameter
values and other messages.
(2) GROUP key
• In Play mode
Serves to select the memory group for the patch, as
follows.
USER Only patches from the user group are
available.
PRESET Only patches from the preset group are
available.
BOTH
Patches from both groups are available.
• In Edit mode
Serves to compare the currently edited patch with the
patch before editing (compare function). For details,
please refer to page 12.
(3) STORE key
Serves to store an edited patch with its new parameter and
level settings in the user group.
EQ MODULATION
3 OD I 5 DST I 2 PHA
EQ
1 2 WAH 1 PIT
4 OD II 6 DST II 5
STEP
HIGH SENS PIT
[–7-+7] [0-10] [–12-+12]
MID FREQ FINE
[–7-+7] [1-64] [–10-+10]
3 – 6 GAIN MIDf 2 – 5
BAL
[1-16] [0-10]
[1-8] [0-10]
LOW
[–7-+7]
LEVEL
[1-8]
2 3
+ DIST EQ MODULATION
1
DELAY REVERB
3 4 1 1
FLG TRM MONO REV
3 DELAY
6 2 2
CHO PPD E/R
DEPTH TIME TIME
[0-10](x100mS)
[0-10] [1-10] [0-90](x100mS)
DELAY TIME
RATE TONE FEEDBACK
[0-99](mS)
[1-50] [–7-+7] [0-10]
PERK 6 STR FEEDBACK MIX
[0-10] [0-10]
[0,1]
MIX
PATCH LEVEL
[0-10]
[0-31]
4 B
DELAY REVERB
EDIT (MANUAL)
PARAMETER SELECT
CANCEL
2
(11)
(4) VALUE + / - keys
These keys serve to change the value of a parameter.
Tapping the VALUE + key increases the value by one step,
and tapping the VALUE - key decreases the value by one
step. Keeping a key depressed changes the value
continuously. To increase the speed of the change, press the
other key as well.
• In Play mode
The keys serve to adjust the output level of the patch.
• In Edit mode
The keys serve to select an effect type and adjust the
currently selected parameter.
(5) PARAMETER SELECT keys
Serve to select the parameter to be edited in Edit mode.
(6) EDIT (MANUAL) / CANCEL key
Pressing this key switches from Play mode to Edit mode.
The Edit mode can also be used as Manual mode to switch
effect modules on and off with a foot pedal.
The key also serves to return from the Edit mode to the Play
mode, and to cancel a store process.
(EDIT VALUE)
BANK
GROUP • BANK
USER
PRESET
( )
BOTH
GROUP
STORE
VALUE
+
–
3 4
(1)
(2)
(10)
(3)
(4)
(5)
(6)
(7)
5